BASIC OPERATION
• SWITCHING ON/OFF THE UNIT
Press
button (14) to turn on the unit.
When the unit is on, press and hold button (14) to turn the unit off.
• FACEPLATE RELEASE
Press
button (2) to detach the removable faceplate.
• SOUND ADJUSTMENT
Shortly press
SEL/MENU
button (26) to enter AUDIO SETTING mode, use SEL/MENU
button (26) or
/
(1) to select the desired adjustment mode. The adjustment mode will
change in the following order:
Shortly press
/
(25) to adjust the sound quality up or down step by step, press and
hold
/
(25) will change the sound quality continuously. Shortly press
MUTE
button (14)
will mute the sound, press it again will resume the sound.
• LOUDNESS
Press
LOUD
button (24) for several seconds to switch loudness function on, and “LOUD”
will appear on the LCD. Press it for several seconds again to release this function, and
“LOUD” will disappear.
• DISPLAY
Press
DISP
button (19) to change display mode.
• EQUALIZATION
Press
EQ
There are five kinds of mode as below:
• REMOTE SENSOR
Point the remote control handset to the remote sensor IR (23). Press the function keys on
the handset to control the system.
• RESET FUNCTION
RESET
button (30) must be activated with either a ballpoint pen or thin metal object. The
RESET
button is to be activated for the following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note:
if press
RESET
button (30), the unit can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the front panel.
• MODE SELECTION
Shortly press
MOD
button (5) to change the mode among: Radio, CD, USB, CARD,
AUX and BT Audio.
• SYSTEM SETTING
Press and hold
MENU
button (26) on the front panel to enter SYSTEM SETTING mode.
Volume Bass
Treble
Balance
Fader
FLAT
CLASSICS
POP M
ROCK M
DSP OFF
36
UK
OPERATION
button (22) shortly to turn on equalization function and to select desired
audio mode.
Use
SEL
button (26) or
/
(1) to select the item you want to change, and use
/
(25)
to change the corresponding setting.