5.
Fit the boat cover and lash it securely and taut to conform to the boat’s shape.
6.
When done, inspect the boat cover and make sure that all points against which
it could chafe are properly secured. Look for depressions the boad cover where
water could pool and eliminate them with props underneath.
3.3.
Cleaning and maintenance
a)
Use non-corrosive agents for cleaning the surfaces only.
b)
After each cleaning, dry all components well before the product is used again.
c)
Store the product in a dry and cool place, protected from moisture and direct
sunlight.
d)
Regularly inspect the product for technical defects and damage.
e)
Use a soft, damp cloth for cleaning.
f)
Do not clean with any sharp and/or metal implements (e.g. a wire brush or a
metal scraper) as these may damage the surface of the product.
g)
Do not clean the product with acidic substances, medical products, thinners,
fuel, oil or other chemicals as they may damage it.
h)
Spot clean with water. Do not use any soap, or the protective coating of the
fabric can fail.
i)
If wet, leave the boat cover to dry and keep it in the storage pouch when not
in use.
