6400 WEST 105TH STREET // BLOOMINGTON, MN 55438 // 1-855-883-6563 // WWW.MSWBIKE.COM
INSTALLATION OF THE 3-BOLT CLEAT
1. Place the cleat on the outside of the shoe with the cleat’s curved side
down and over the three bolt holes. (Fig. 4)
2. Insert the 3-bolt washers so that rounded sides are facing up.
(The square washers have a rounded edge and a sharp edge)
3. Apply grease to the threads of the cleat bolts. Fully tighten the cleat bolts.
WARNING:
Fully tighten the cleat bolts before engaging the cleat into the
pedal! If the cleats are not fully tightened, the shoe will be incredibly difficult
to remove and may cause damage to the shoe or cause a crash leading
to serious injury or even death. Always fully tighten the cleat bolts during the
initial adjustments. Do not attempt to make adjustments with a loose cleat.
HOW TO CLIP IN TO THE PEDALS
ENGAGING
Press the cleat into the pedal. The cleat of the shoe sits under the ball of the
foot and over the spindle of the pedal. Use this frame of reference to help
guide the cleat into the pedal until it becomes intuitive. (Fig. 5)
DISENGAGING
Disengage your foot by twisting your heel to the outside, away from the bike.
Plan ahead during initial rides and give yourself time to disengage your foot
before coming to a complete stop. (Fig. 6)
ADJUSTING RETENTION FORCE
The tension of the spring is adjusted for each pedal (top and bottom) with
the adjustment bolt in the rear. Turn the 3mm bolt in a clockwise direction
to increase retention force, and in a counterclockwise direction to decrease
retention force. (Fig. 7)
NOTE:
On mountain-style pedals
please note there are two adjustment
bolts on each pedal.
WARNING:
Clipless pedals provide a secure attachment to your bicycle
that can result in increased efficiency when riding. LEARNING HOW TO USE
CLIPLESS PEDALS CORRECTLY TAKES PRACTICE! WE STRONGLY
SUGGEST practicing how to enter and disengage from your pedals with
a friend holding you and your bicycle upright or positioned in a doorway where
you can lean up against a side and repeatedly practice getting in and out
of the pedal. Your first rides should be in low traffic areas or on soft grass until
you feel comfortable getting in and out of clipless pedals to avoid potential falls
in hazardous traffic situations or injury.
WARNING:
for dual-purpose pedals, never ride in open-toed or open-
heeled shoes as they don’t fully support and secure your foot. Doing so could
lead to a loss of control and serious injury and/or death
CLIPLESS PEDAL USE
• Initially place the cleat over the ball of the foot to get started
• Practice engaging and disengaging from the pedals several times
in a stationary position before riding
• Keep the cleat and pedal clean to ensure proper usage
• Adjust the retention force of the pedal to a light setting initially until you
are accustomed to getting in and out of the pedal (Fig. 7)
ONGOING MAINTENANCE
To function properly, pedals and cleats must be kept clean. Occasional
lubrication of cleat bolts will help prevent rust and seizure. Pedals should
be serviced if: rotating pedal emits noise, rotation by hand feels rough,
and/or there is play in the bearings.
LIMITED 2-YEAR WARRANTY
MSW warrants this new MSW product against defects in materials and
workmanship for two (2) years from the original date of retail purchase
by the consumer. This limited warranty is expressly limited to the repair
or replacement of the original product, at the option of MSW, and is the
sole remedy of the warranty. This limited warranty applies only to the original
purchaser of the MSW product and is not transferable.
In no event shall MSW be liable for any loss, inconvenience or damage,
whether direct, incidental or consequential or otherwise resulting from
breach of any express or implied warranty or condition of merchantability,
fitness for a particular purpose, or otherwise with respect to this product
except as set forth herein. This warranty gives the consumer specific legal
rights, and those rights and other rights may vary from state to state.
This warranty does not cover the following:
• Damage due to improper assembly or follow-up maintenance or lack
of skill, competence or experience of the end user
• Products that have been modified, neglected, used in competition
or for commercial purposes, misused or abused, involved in accidents
or anything other than normal use
• Damage or deterioration to the surface finish, aesthetics or appearance
of the product
• Normal wear and tear
• Labor required to remove and/or refit and re-adjust the product within
the bicycle assembly
• Installation of components, parts, or accessories not originally intended
use with or compatible with MSW products.
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES
ARE EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED
WARRANTIES OR CONDITIONS INCLUDING WARRANTIES
OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE.
463 09/13
Figure 6
Figure 7
Figure 5
Figure 4
cleat
washers
cleat
bolts (lubricate)
clipless pedal instructions
