background image

User’s Manual

SP112C Series

 

3. Battery Charge Current:

A. Solar Panel: depends on the solar panel, 10A max,
B. POE: fixed current, 2.0A max

4. Battery Types: 12V AGM Battery

5. Protection:
5.1

 

Battery Polarity Reverse Protection:
If only battery connected to terminal, when the battery polarities 
were reversed, the model will stop output and REV indicator light 
on. When the battery be removed and re-connected to terminal, 
the function will be disable, if there is a PoE power sources be 
connected, when the battery polarities reversed, the battery will be 
disconnected. 

5.2

 

Battery Over Discharge Protection:  
Cuts off the load when the battery voltage is lower than 11V + 0.3V, 
and auto recover when the battery voltage returns to 12 V + 0.3V 

5.3

 

Battery Over Charge Protection:  
Fuse control, over 15A, the fuse will be burnt. 

5.4

 

Solar Panel Polarity Reverse Protection:   
When solar panel polarities be reversed, the charger stop output, it 
won’t damage the charger or end device 

5.5

 

Solar Panel Over Charge Protection:   
When charge current over 15A, the fuse will be burnt. 

Summary of Contents for SP112C Series










Reviews: