Rev AE
Startup Procedure 5-3
MSSC QM1610 Operator Manual
If you frequently use the printer, MSSC recommends that you purge the
system every 30 days. During purge, the solvent flushes the circuits of the
system for two minutes. After purge, use the ink to wash away the solvent
in the circuit. Flush the ink into the printer for two minutes to make sure
that the circuit is full with the ink.
Note:
During purge, keep an ink catch reservoir before the printer nozzle to
prevent the ink from splashing on the products or the production line.
Warning
PERSONAL INJURY. Do not point the nozzle at the operator or
other persons present near the printer.
Startup Procedure
At the beginning of each shift, perform the following tasks:
1
With the spray cap on the solvent bottle, spray the nozzles with
solvent. In harsh environments, you may need to spray the nozzles
more often than once per shift.
2
Purge the printhead.
3
Check the ink level in the bottle; install a new bottle if necessary. In
harsh environments, or if print quality declines, replace the ink bottle
with solvent and purge solvent through the unit.
Figure 5-2: Nozzle and Internal Sensor Maintenance
All manuals and user guides at all-guides.com
