4-22 User Interface
Rev AE
MSSC QM1610 Operator Manual
If you require automatic detection of speed, press
till
Yes
is
highlighted and press
to save the settings and return to the main
menu. If you wish to select manual speed detection, press
till
No
is highlighted and then press
to change the speed
value (range: 6-60 meter/minute). Press
to save the speed
settings and return to the main menu.
Note:
If the production line speed is stable (if frequency-change control is
adopted), MSSC recommends that you set the production line speed settings to
the fixed speed mode. This improves the working stability of the printer.
2
Select
Set Direction
and press
to enter the following interface.
There are three production line direction options:
Auto
- Automatic detection of production line direction (internal
sensors only. Cannot be used with an external photocell)
L-->R
- The direction of the production line is from left to right
R-->L
- The direction of the production line is from right to left
7IX7TIIH
%YXS(IXIGX#
QQMR
2S
=IW
Figure 4-45: Set Speed
7IX(MVIGXMSR
0"6
%YXS
6"0
Figure 4-46: Set Direction
All manuals and user guides at all-guides.com
