3-4 Fast Installation
Rev AE
MSSC QM1610 Operator Manual
Warning
PERSONAL INJURY. Avoid any contact between QM1610 and the
product as this will result in poor print quality.
Procedure
Note:
For pictorial guidance on the installation steps, refer to Figure 3-3 on
page 3-3.
1
Attach the aluminium clamp to the printer controller mounting frame
using the two screws and two nuts. Refer to Figure 3-5 on page 3-5.
Note:
Make sure the mounting clamp hole faces the floor.
6 mm maximum
throw distance
Figure 3-4: QM1610 and Conveyor
All manuals and user guides at all-guides.com
