2016 MSpa
Service Manual
MSpa website: www.the-mspa.com
- 7 -
2.6 Try to Repair the Tiny Holes or Split on Spa Liner Instead of Replacing a New Spa Liner
For pool liner air leakage caused by tiny holes or splits, it is suggested to first try to repair with glue and PVC
swatches provided in the repair kit. You can also order the glue and repair swatches from the spare part list.
With the repair material, most pin holes and splits can be repaired easily within 10 minutes.
Spa Tub and Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
1. Clean and dry the area to be repaired thoroughly
2. Apply the glue to the PVC patch and quickly attach it onto the damaged surface
3. Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes
NOTE:
Glue is not included
2.7 Using Spa in the Cold Weather
It’s only possible to set up and leave the spa in the environment of outside temperature of less than 4°C as long as the
spa has a constant water temperature guaranteed over 4°C.
Spa can only be used for temperature down to maximum
-10°C if it is properly set up to make sure no frozen water inside control box, pipes and spa pool.
Optional accessories:
B9300109N Heat Preservation Mat
is helpful to avoid heat loss from bottom and it
provides better heat insulation results with the inflatable bladder in use.
Inflatable bladder provides better heat preservation and rain outflow.
B0301965 Winter electric heat preservation mat offers great effect to retain constant
temperature for Mspa use in the chilly time, fitting to all Mspa models. It is round shape, made
of laminated PVC material. 220-240V, 400W, Dia.1.2m (47”)
IPX5
Winter sauna cover B0301687N suitable for max, 3 adults to use and fits all Mspa 4-person
round products.
B0301688N suitable for max, 4 adults to use and fits all Mspa 6-person round products
B0301966 suitable for max, 2 adults to use and fits to M-009LS only
