2016 MSpa
Service Manual
MSpa website: www.the-mspa.com
- 15 -
7.
Take out the power board case
8. Take out the power board from the case
9. Disconnect all electrical cables and detection leads from the original power board and connect all cables to the
new power board correctly and assemble the power board into the control box in reverse order.
4.5 How to Replace the Bubble generator
1. Take off water inlet and outlet caps
2. Remove the control panel
3. Deflate spa pool
4. Unscrew the check valve plastic nut
The upper square valve is for inflation
The button round valve is for deflation
