12
REF. NO.
PARTS DESCRIPTION
QTY.
Spa cover with aluminum foil inside
Spa tub
Wired controller
Heat preservation bubble mat
Digital lock
Iinflation hose for bladder
Filter cartridge*2, cartridge base
Inflatable bladder
Spa drain valve adaptor
Wrench
Repair kit
Warning label
NOTE:
When ordering parts, be sure to quote the model number and part numbers.
A
B
C
D
E
F
G
H
I
J
K
L
1
1
1
1
1
1
1
1
1
1
1
1
FIRST USE PREPARATION AND SET-UP
●
The spa can be installed indoor and outdoor. For household use only.
●
The spa must be set up on a flat, smooth and supporting surface that is capable of supporting the maximum
load of the filled spa with listed maximum occupants.
●
Make sure the area is free of sharp objects under or around the spa. Uneven of unsound surfaces can
damage the spa and void your warranty. Level the surface before filling spa with water
●
Provide adequate drainage system around the spa to deal with overflow water and splashes.
●
Provide a properly located power outlet to connect the spa and allow easy access for period testing of the
cord mounted GFCI.
●
Make sure there is enough clearance around the spa for full access to the spa equipment for maintenance
and/or service.
Site preparation and requirements
● Verify the supporting floor can support the filled weight of spa with maximum number of occupants. Check
with a qualified contractor or structural engineer to verify the requirement.
Additional requirements for indoor installation
