MSI Z87 MPOWER MAX Instructions Manual Download Page 88

Page: 88 / 118

Chapter 3

3-18

BIOS Setup

Enhanced Turbo [Auto]

Enables or disables Enhanced Turbo function for all CPU cores to boost CPU

performance.

[Auto]

This setting will be configured automatically by BIOS.

[Enabled]

All CPU cores would be increased to maximum turbo ratio.

[Disabled] Disables this function.

OC Genie Function Control [By Onboard Button]

Enables the OC Genie function by virtual button in BIOS or physical button on

motherboard. Enabling OC Genie function can automatically overclock the system

with MSI optimized overclocking profile.

[By BIOS Options] OC Genie function is enabled by clicking the virtual OC Genie

button at the top left corner of BIOS setup screen.

[By Onboard Button]OC Genie function is enabled by pressing the physical OC Genie

button on the motherboard.

OC Genie Switch [Gear1]

Selects a kind of overclocking profiles for OC Genie Function. This item appears when

"OC Genie Function Control" sets to [By BIOS Options].

[Gear1]

Enables Gear1 overclocking profile for overclocking.

[Gear2]

Enables Gear2 overclocking profile for extreme overclocking.

Important

We recommend that you do not to make any modification in OC menu and do not to

load defaults after enabling the OC Genie function.
Updating BIOS or clearing CMOS is not allowed in OC Genie mode, and it may

cause OC Genie function fail or other effect.

Adjust Ring Ratio [Auto]

Sets the ring ratio. The valid value range depends on the installed CPU.

Adjusted Ring Frequency

Shows the adjusted Ring frequency. Read-only.

Adjust GT Ratio [Auto]

Sets the integrated graphics ratio. The valid value range depends on the installed

CPU.

Adjusted GT Frequency

Shows the adjusted integrated graphics frequency. Read-only.

DRAM Reference Clock [Auto]

Sets the DRAM reference clock. The valid value range depends on the installed CPU.

This item appears when a CPU that supports this adjustment is installed.

DRAM Frequency [Auto]

Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

Adjusted DRAM Frequency

Shows the adjusted DRAM frequency. Read-only.

▶

•

▶

Summary of Contents for Z87 MPOWER MAX























































































































Search results

Summary of Contents for Z87 MPOWER MAX

Reviews:

MSI Z87 MPOWER MAX, Instructions Manual, Page: 88 / 118

Search results

Summary of Contents for Z87 MPOWER MAX

Reviews: