MSI Z87 MPOWER MAX Instructions Manual Download Page 78

Page: 78 / 118

Chapter 3

3-8

BIOS Setup

Ipv6 PXE Support [Enabled]

When “Enabled”, the system UEFI network stack will support Ipv6 protocol. This

item will appear when “Network Stack” is enabled.

[Enabled]

Enables the Ipv6 PXE boot support.

[Disabled]

Disables the Ipv6 PXE boot support.

SATA Mode [AHCI Mode]

Sets the operation mode of the onboard SATA controller. The default mode is

AHCI.

[Disabled]

Disables the SATA function.

[IDE Mode] Specify the IDE mode for SATA storage devices.

[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced

Host Controller Interface) offers some advanced features to enhance

the speed and performance of SATA storage device, such as Native

Command Queuing (NCQ) and hot-plugging.

[RAID Mode] Enables RAID function for SATA storage devices.

SATA1~6 Hot Plug [Disabled]

Allows user to enable or disable the SATA hot plug support. This item will appear

when the “SATA Mode” set to [AHCI]/ [RAID].

[Enabled]

Enables hot plug support for the SATA ports.

[Disabled]

Disables hot plug support for the SATA ports.

External SATA 6Gb/s Controller Mode [IDE]

Sets the operation mode of the external SATA controller.

[Disabled]

Disables the SATA function.

[IDE Mode] Specify the IDE mode for SATA storage devices.

[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced

Host Controller Interface) offers some advanced features to enhance

the speed and performance of SATA storage device, such as Native

Command Queuing (NCQ) and hot-plugging.

HD Audio Controller [Enabled]

Enables or disables the onboard High Definition Audio controller.

HPET [Enabled]

Enables or disables the HPET (High Precision Event Timers) support.

Integrated Graphics Configuration

Adjusts integrated graphics settings for optimum system. Press <Enter> to enter the

sub-menu.

Initiate Graphic Adapter [PEG]

Selects a graphics device as the primary boot device.

[IGD]

Integrated Graphics Display.

[PEG]

PCI-Express Graphics Device.

Integrated Graphics Share Memory [64M]

Selects a fixed amount of system memory allocated to the onboard graphics. This

item defines the exact memory size shared to the onboard graphics. [Options: 32M,

64M, 128M, 256M]

▶

Summary of Contents for Z87 MPOWER MAX























































































































Search results

Summary of Contents for Z87 MPOWER MAX

Reviews:

MSI Z87 MPOWER MAX, Instructions Manual, Page: 78 / 118

Search results

Summary of Contents for Z87 MPOWER MAX

Reviews: