background image

Chapter 1

1-14

Getting Started

 Important

Confirm that the CPU heatsink has formed a tight seal with the CPU before booting 

your system.
Whenever the CPU is not installed, always protect the CPU socket pins by covering 

the socket with the plastic cap.
If you purchased a separate CPU and heatsink/ cooler, Please refer to the 

documentation in the heatsink/ cooler package for more details about installation.

7.  Locate the CPU fan connector on the motherboard.
8.  Place the heatsink on the motherboard with the fan’s cable facing towards the fan 

connector and the fasteners matching the holes on the motherboard.

9.  Push down the heatsink until the four fasteners get wedged into the holes on 

the motherboard. Press the four fasteners down to fasten the heatsink. As each 

fastener locks into position a click should be heard.

10. Inspect the motherboard to ensure that the fastener-ends have been properly 

locked in place.

11. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.

Motherboard

Fastener-end

CPU fan connector

Summary of Contents for Z87 MPOWER MAX























































































































Reviews: