MSI Z87 MPOWER MAX Instructions Manual Download Page 81

Page: 81 / 118

Chapter 3

3-11

BIOS Setup

EuP 2013 [Disabled]

Enables or disables the system power consumption according to EuP2013

regulation.

[Enabled]

Optimize the system power consumption according to EuP 2013

regulation.

[Disabled]

Disables this function.

Note: When enabled, the system will not support RTC wake up event functions.

Restore after AC Power Loss [Power Off]

Sets the system behaviors while encountering the AC power loss.

[Power Off] Leaves the system in power off state after restoring AC power.

[Power On] Boot up the system after restoring AC power.

[Last State] Restores the system to the previous state (power on/ power off)

before AC power loss.

On board LED Control [On]

Enables or disables the onboard non-function LEDs.

[On]

Enables onboard non-function LEDs.

[Off]

Disables onboard non-function LEDs.

Windows 8 Configuration

Sets Windows 8 detailed configuration and behaviors. Press <Enter> to enter the sub-

menu.

Windows 8 Feature [Disabled]

Enables the supports for Windows 8 or disables for other operating systems.

Before enabling this item, make sure all installed devices & utilities (hardware &

software) should meet the Windows 8 requirements.

[Enabled]

The system will switch to UEFI mode to meet the Windows 8

requirement.

[Disabled]

Disables this function.

MSI Fast Boot [Disabled]

MSI Fast Boot is the fastest way to boot the system. It will disable more devices to

speed up system boot time which is faster than the boot time of “Fast Boot” .

[Enabled]

Enables the MSI Fast Boot function to speed up booting time. And

the following "Fast Boot" will be disabled and fixed.

[Disabled]

Disables MSI Fast Boot.

Fast Boot [Enabled for Windows 8, Disabled for other OS]

Enables or disables the Windows 8 fast boot feature. This item will only be

available when "MSI Fast Boot" is disabled.

[Enabled]

Enables the Fast Boot configuration to accelerate system boot time.

[Disabled]

Disables the Fast Boot configuration.

Important

If you want to enter BIOS with enabled “MSI Fast Boot” mode or enabled "Fast Boot"

mode, you have to click the "GO2BIOS" tab on MSI Fast Boot utility screen or press

the "GO2BIOS" button (optional) on the motherboard. And then the system will enter

to BIOS setup directly at next boot.

▶

Summary of Contents for Z87 MPOWER MAX























































































































Search results

Summary of Contents for Z87 MPOWER MAX

Reviews:

MSI Z87 MPOWER MAX, Instructions Manual, Page: 81 / 118

Search results

Summary of Contents for Z87 MPOWER MAX

Reviews: