CHAPTER 4
AWARD
®
BIOS SETUP
4-23
Resume by Alarm
This function is for setting date and time for your computer to boot
up. During Disabled, you cannot use this function. During Enabled, choose
the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the
system will boot up. Set to 0, to boot
every month.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and
second the system will boot up.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system, before this function will work.
IRQ 8 Break Suspend
You can Enable or Disable monitoring of IRQ 8 so it does not awaken
the system from suspend mode.
Reload Global Timer Events
IRQ[3-7,9-15], NMI
: Disabled
Primary IDE 0
: Enabled
Primary IDE 1
: Enabled
Secondary IDE 0
: Disabled
Secondary IDE 1
: Disabled
Floppy Disk
: Disabled
Serial Port
: Enabled
Parallel Port
: Disabled
During Enabled, any event occuring on each device listed above will
restart the global timer for Standby Mode.
