CHAPTER 2
HARDWARE INSTALLATION
2-37
2.16-1 Floppy Disk Connector: FDC
The mainboard also provides a standard floppy disk connector FDC that
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This
connector supports the provided floppy drive ribbon cables.
FDC
1
2.16-2 External Audio Jack Connector: J5 (reserved)
This connector is used for Audio-Jacks such as: Speaker, Line-In, and Mic.
2.16-3 2mm CD-ROM Input Connector: J4
J4 is used as a CD Line-in connector. Connect the audio cable provided by
the CD-ROM.
2.16-4 Chassis Intrusion Switch: SW1
The Switch is used to monitor any intrusion on the system. If the Chassis is
open, the switch will be turn on. The system will record this status. To clear
the warning, you must enter the BIOS settting and clear the status.
