manualshive.com logo in svg

MSI MS - 9211, User Manual, Page: 72 / 95

Share
Download
MSI MS - 9211 User Manual Download Page 72

3-21

BIOS Setup

Power Management Setup

ACPI Function

This item is to activate the ACPI (Advanced Configuration and Power Man-
agement Interface) function. If your operating system is ACPI-aware, such as
Windows 98SE/2000/ME, select 

Enabled

. Setting  options: 

Enabled

, 

Disabled

.

NMI Control

This feature allows users to disable or enable the non-maskable interrupts
(NMI) that prevent normal operation of the computer, i.e. memory parity check.
Setting options: 

Enabled

, 

Disabled

.

Power Management

This item is used to select the degree (or type) of power saving and is related
to these modes: 

Suspend Mode

 and 

HDD Power Down

. There are three op-

tions for power management:

Min Saving

Minimum Power Management. Suspend Mode = 1 Hour.

Max Saving

Maximum Power Management. Suspend Mode = 1 Min.

User Define

Allows end users to configure each mode separately.

MSI Reminds You...

S3-related functions described in this section are available only
when your BIOS supports S3 sleep mode.

Summary of Contents for MS - 9211
































































































Reviews:

No comments