manualshive.com logo in svg

MSI MS - 9211, User Manual, Page: 3 / 95

Share
Download
MSI MS - 9211 User Manual Download Page 3

iii

Copyright Notice

The material in this document is the intellectual property of 

MICRO-STAR

INTERNATIONAL

. We take every care in the preparation of this document,

but no guarantee is given as to the correctness of its contents.  Our products
are under continual improvement and we reserve the right to make changes
without notice.

Trademarks

All trademarks are the properties of their respective owners.

AMD, Athlon™, Athlon™ XP, Thoroughbred™, and Duron™ are registered
trademarks of AMD Corporation.
Intel

®

 and Pentium

®

 are registered trademarks of Intel Corporation.

PS/2 and OS

®

/2 are registered trademarks of  International Business Machines

Corporation.
Microsoft is a registered trademark of Microsoft Corporation.  Windows

®

 98/

2000/NT/XP are registered trademarks of Microsoft Corporation.
Netware

®

 is a registered trademark of Novell, Inc.

Award

®

 is a registered trademark of  Phoenix Technologies Ltd.

AMI

®

 is a registered trademark of American Megatrends Inc.

Revision History

Revision

Revision  History

Date

V1.0

First  release

December 2002

Technical Support

If a problem arises with your system and no solution can be obtained from the
user’s manual, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.

Visit the MSI website for FAQ, technical guide, BIOS updates, driver

updates, and other information: 

http://www.msi.com.tw/

Contact our technical staff at: 

[email protected]

Summary of Contents for MS - 9211
































































































Reviews:

No comments