A-9
USB PC to PC Networking Function
- Press “OK” to complete your network configuration. Restart your
computer and you’ll be ready to connect to Internet.
b.
If your existing HOME/OFFICE network is using DHCP to
assign client’s IP address, your Network Sever will configure your
network configuration automatically. So you can skip those
procedures described in the previous session.
SPECIAL NOTICE for those users who have already
installed Network Adapter in their system:
If you’ve already configured your [IPX/SPX] and [Client for Netware Networks]
before installing GeneLink
TM
driver, we strongly recommend that you should
also install
Software Router
when you install GeneLink
TM
driver into your
system. If you decide not to install
Software Router
, then the OS will not allow
two IPX/SPX configurations co-exist in the same system. This will cause
GeneLink
TM
Driver Install Program overwrite your original IPX/SPX configu-
ration and make your original network configuration malfunction.
Enter a name for
your computer
Workgroup’s name
Description of
your computer