manualshive.com logo in svg

MSI MS-6391, User Manual, Page: 88 / 104

Share
Download
MSI MS-6391 User Manual Download Page 88

Appendix A

A-2

Installing GeneLink™ LAN Driver

Before you use the function, you need to install the GeneLink™

LAN Driver to all PCs connected via USB PC to PC cables.

Step 1.  Installing driver

1.

Insert the driver CD and click “USB PC to PC” button to install the

driver.

2.

The welcome dialog box appears and click Next > button.

3.

Choose the destination folder and click Next > button.

4.

Select components that you want to install and then click

“Next >” button. (GeneLink

TM

 LAN Driver is used only for those

PCs connected via USB PC to PC port so that resources are shared

between these PCs; GeneLink

TM

 Software Router allows your PC

to connect to another existing Home/Office LAN for network re

source or Internet sharing.)

5.

The Setup Program will install all necessary components

automatically.

6.

Setup completes. Then select “Yes, I want to restart my computer

now” and then click “FInish” button to reboot your computer for

updating your driver configuration.

After you complete the installation procedures, you’ll find Setup

Program has installed GeneLink

TM

 network driver in your computer.  It

binds TCP/IP, NetBEUI and IPX protocols to GeneLink

TM

 device.

Step 2.  Connect your PCs via the USB PC to PC cable

Summary of Contents for MS-6391









































































































Reviews:

No comments