MSI MS-6391 User Manual Download Page 3

Page: 3 / 104

III

Copyright Notice

The material in this document is the intellectual property of

MICRO-

STAR INTERNATIONAL

. We take every care in the preparation of this

document, but no guarantee is given as to the correctness of its contents.

Our products are under continual improvement and we reserve the right

to make changes without notice.

Trademarks

All trademarks used in this manual are the property of their respective

owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 98, Windows ME, and Windows NT are registered trademarks

of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

Revision History

Revision

Revision History

Date

V1.0

First Release

Jul. 2001

Summary of Contents for MS-6391









































































































Search results

Summary of Contents for MS-6391

Reviews:

Related manuals for MS-6391

Brands by name

Popular brands

MSI MS-6391, User Manual

Search results

Summary of Contents for MS-6391

Reviews:

Related manuals for MS-6391

Brands by name

Popular brands