Chapter 4 - BIOS Setup
4-15
button.
[Suspend]
W hen you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Restor e on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
Leaves the computer in the power off state.
[On]
Leaves the computer in the power on state.
[Last State]
Restores the system to the previous status before power
failure or interrupt occurred.
Wakeup Event Setup
Press <Enter> and the following sub-menu appears:
PowerOn by Keyboard
This controls how and whether the PS/2 keyboard is able to power on the
system. If you choose [Password], you must type the password to power on the
system. Settings: [Disabled], [Password] and [Any Key].
Key board Password
If
PowerOn by Keyboard
is set to [Password], then you can set a password in
the field for the PS/2 keyboard to power on the system.
PowerOn by M ouse
The setting determines whether the system will be awakened from power
saving modes when the PS/2 mouse input signal is detected. Setting options:
[Disabled], [Any Key], [Left Button], [Right Button].
Resume by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming
call on the modem) awakens the system from a soft off state.
Resume by PCI/PCI-E Device
This controls how and whether the system can be powered on by the devices
installed on PCI/PCI-E slots. Setting options:
[Disabled], [Enabled].
Summary of Contents for MEGA MPC 915
