MSI MEGA MPC 915 User Manual Download Page 31

Page: 31 / 86

2-14

CPU Fan Connectors: CPUFAN1/SYSFAN1

The CPU Fan/System Fan connectors support system cooling fans with +12V

that is controlled by PWM. W hen connecting the wire to the three-pin head connectors,

always note that the red wire is the positive and should be connected to the +12V (that

is controlled by PWM), the black wire is Ground and should be connected to GND.

SYSFAN1

SENSOR

FAN Power

GND

CPUFAN1

SENSOR

FAN Power

GND

Card Reader Connector: CR1

The mainboard provides a connector to connect the Card Reader on the Front

Panel.

CR1

CD-in Connector: CDIN1

The connector is for CD-ROM audio connector. If you want to use other audio-

in functions such as TV-in, you can also use this connector.

GND

CDIN1

Summary of Contents for MEGA MPC 915























































































Search results

Summary of Contents for MEGA MPC 915

Reviews:

Related manuals for MEGA MPC 915

Brands by name

Popular brands

MSI MEGA MPC 915, User Manual

Search results

Summary of Contents for MEGA MPC 915

Reviews:

Related manuals for MEGA MPC 915

Brands by name

Popular brands