2-3
Chapter 2 - Mainboard Hardware
CPU Installation Procedures for Socket 754
1.
Please turn off the power and
unplug the power cord before
installing the CPU.
2.
Pull the lever sideways away from
the socket. Make sure to raise the
lever up to a 90-degree angle.
3. Look for the gold arrow. The gold
arrow should point towards the
lever pivot. The CPU can only fit in
the correct orientation.
4. If the CPU is correctly installed, the
pins should be completely embed-
ded into the socket and can not be
seen. Please note that any
violation of the correct installation
procedures may cause permanent
damages to your mainboard.
5.
Press the CPU down firmly into the
socket and close the lever. As the
CPU is likely to move while the
lever is being closed, always close
the lever with your fingers
pressing tightly on top of the CPU
to make sure the CPU is properly
and completely embedded into the
socket.
Open Lever
90 degree
Sliding
Plate
Gold arrow
Gold arrow
Gold arrow
Correct CPU placement
Incorrect CPU placement
X
O
Close
Lever
Press down
the CPU
Summary of Contents for MEGA mPC 800K
Page 1: ...User s Guide MEGA mPC 800K G52 B6276X8 ...
Page 5: ...v WEEE Statement ...
Page 6: ...vi ...
Page 7: ...vii ...
