MSI MEGA mPC 800K User Manual Download Page 54

Page: 54 / 64

4-8

4.4 Advanced BIOS Features

Quick Boot

Setting the item to [Enabled] allows the system to boot fast since it will skip some check
items. Available options: [Enabled], [Disabled].

Full Screen Logo Show

This item enables you to show the company logo on the bootup screen. Settings are:

[Enabled]

Shows a still image (logo) on the full screen at boot.

[Disabled]

Shows the POST messages at boot.

BootUp Num-Lock LED

This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off] will
allow users to use the arrow keys on the numeric keypad.

Security Option

This specifies the type of BIOS password protection that is implemented. Settings are
described below:

The password prompt appears only when end users try

to run Setup.

A password prompt appears every time when the com-

puter is powered on or when end users try to run Setup.

Description

Option

[Setup]

[Always]

Summary of Contents for MEGA mPC 800K

































































Search results

Summary of Contents for MEGA mPC 800K

Reviews:

Related manuals for MEGA mPC 800K

Brands by name

Popular brands

MSI MEGA mPC 800K, User Manual

Search results

Summary of Contents for MEGA mPC 800K

Reviews:

Related manuals for MEGA mPC 800K

Brands by name

Popular brands