3-5
Customizing this Notebook
2.
Plug the monitor
’
s D-type connector into the Notebook
’
s VGA port.
3.
Connect the monitor
’
s power cord and turn on the monitor.
4.
Turn on the Notebook and the monitor should respond by default. If not,
you can switch the display mode by pressing [
Fn
]+[
F2
]. Alternately, you
can change the display mode by configuring the settings in
Display
Properties
of Windows operating system.
Connecting the IEEE 1394 devices
The IEEE 1394 port of your Notebook is a next-generation serial bus that
features a high-speed transfer rate and the connection of up to 63 devices,
allowing you to connect many high-end peripheral devices and consumer
electronic appliances, such as the DV (digital video camera). The IEEE 1394
standard interface supports
“
plug-and-play
”
technology, so that you can
connect and remove the IEEE 1394 devices without turning off the Notebook.
To connect the IEEE 1394 device, simply connect the cable of the device to the
IEEE 1394 port of your Notebook.
