background image

Addendum

FJ1103-0

DFQX1481ZA

Printed in Japan

Industry Canada

This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

This addendum explains the cases where the operation of the computer differs from that in the Operating Instructions and the
Reference Manual.

First-time Operation

“OPERATING INSTRUCTIONS”

Windows 2000

Replace Step 

6

 with the following

.

Read Me First

“OPERATING INSTRUCTIONS”

Add the following to “For Canada”.

6

Turn your computer on and run the Setup Utility.

1

Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.

2

Press   

F2

   while [Panasonic] boot screen is displayed soon after computer begins the startup procedure.

3

Press   

F9

   . At the confirmation message, select [Yes] and press   

Enter

  .

4

Select the [Advanced] menu, then set [GPS] to [Disable]. (If there is a [Wireless Modem] or [CDMA], also set them to
[Disable].)

5

Press   

F10

   . At the confirmation message, select [Yes] and press   

Enter

  .

The computer will restart.

CAUTION

Do not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off
forcibly.
Do not slide the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before powering it on again.

Windows 2000

Perform the following after setting up Windows.

1

Select [Start]-[Run] and input “c:\util\gps\skipenum.reg”, then select [OK].

2

Select [Yes] and select [OK].

3

Restart the computer as follows:
Select [Start] - [Shut Down], and select [Restart], then select [OK].

4

Press   

F2

   while [Panasonic] boot screen is displayed soon after computer begins the startup procedure.

5

Press   

F9

   . At the confirmation message, select [Yes] and press   

Enter

  .

6

Press   

F10

   . At the confirmation message, select [Yes] and press   

Enter

  .

The computer will restart.

Setting up GPS

Windows XP

Add the following to  Step 

6.

CAUTION

If you have changed the Setup Utility settings, be sure to reset them to the default settings.

Reviews: