BIOS Setup
4-15
Power Button Function
This feature allows users to configure the Power Button function. Settings
are:
[Power Off]
The power button functions as a normal power-on/
-off button.
[Suspend]
W hen you press the power button, the computer
enters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer
is turned off.
Restor e on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
Leaves the computer in the power off state.
[On]
Leaves the computer in the power on state.
[Last State]
Restores the system to the previous status before
power failure or interrupt occurred.
Wakeup Event Setup
Press <Enter> and the following sub-menu appears.
Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system from
S3 (Suspend to RAM) sleep state. Setting options: [Disabled], [Enabled].
PowerOn by Keyboard
This controls how and whether the PS/2 keyboard is able to power on the
system. If you choose [Password], you must type the password to power
on the system. Settings: [Disabled], [Password] and [Any Key].
Key board Password
If
PowerOn by Keyboard
is set to [Password], then you can set a pass-
word in the field for the PS/2 keyboard to power on the system.
PowerOn by M ouse
The setting determines whether the system will be awakened from power
saving modes when the PS/2 mouse input signal is detected. Setting options:
[Disabled], [Any Key], [Left Button], [Right Button].
