Chapter 4
4-12
PCI IDE BusM aster
Set this option to [Enabled] to specify that the IDE controller on the PCI local
bus has bus mastering capability. Settings options: [Disabled], [Enabled].
I/O Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1/2
These items specify the base I/O port addresses of the onboard Serial Port
1 (COM A) / Serial Port 2 (COM B). Selecting [Auto] allows AMIBIOS to
automatically determine the correct base I/O port address. Settings: [3F8/
IRQ4], [2F8/IRQ3], [3E8/IRQ4], [2E8/IRQ3] and [Disabled].
ATA/IDE Configuration, Configure SATA as
These 2 items allow you to select the ATA/IDE and SATA configuration.
Select [Disabled] in
ATA/IDE Configuration
if you want to disable both
ATA/IDE configuration. Select [Compatible] or [Enhanced] to use the IDE, S-
ATA and P-ATA devices. Refer to the following tables for details.
ATA/IDE Configuration
(Compatible)
SATA Only
[SATA 1//2]
PATA Pri, SATA Sec
[IDE1, SATA2]
SATA Pri, PATA Sec
[SATA1, IDE1]
PATA Only
[IDE1]
