MSI 4260B, Operator'S Manual, Page: 34 / 64

30 MSI-4260 Port-A-Weigh Operator’s Manual
4.9 Filter Setup
Changing the filter settings allows the scale to adjust to situations where there is a lot a
movement in the structure. If the reading is not stable, it can often be improved by
increasing the filter setting. Settling time will be longer as the filter setting is increased.
However, the
MSI-4260
employs algorithms that speed up large weight changes while
still controlling vibration even with high filter settings.
TARE
T
TARE
T
ZERO
O
sto
1) With the 4260 off, press and hold
the USER key, then press the
POWER
key.
...or while the 4260 is on, press USER
and POWER simultaneously.
2) The first item of the Setup Menu
is “Func1”. Scroll to “Filtr” with
the
USER key.
3) To setup the filter, press TARE .
The display will blink the current
filter setting.
4) Change the filter setting by
pressing the USER key.
There are four available filter settings.
Not all choices are shown in this
example.
5) When the desired filter setting is
annunciated, press TARE . The
next item in the Setup Menu
appears.
6) Either press ZERO to exit Setup
and store all changes, or
continue to another Setup Menu
item using the
USER Key.
)YQF
+L
High Filter 1
2))
Blinking
Store and return to
weight display
)LOWU
2))
Blinking
/2
Low Filter, Blinking
8QLW
Next Setup Menu Item
USER
F
USER
F
Cancel all setup
changes
esc
POWER
Filter Setup
Hold
USER
F
esc
POWER
USER
F
USER
F
USER
F
Figure 4-10. Filter Setup Menu Map