5
X direction moving
1. Connect power line to host back bottom side.Set illumination knob (on the left bottom side of microscope host)
to lowest brightness, rotating illumination brightness by need during operation.
Exchange fuse: as figure 03, draw out fuse box and take off trouble fuse,set spare fuse to fuse box. Put box back
to holder.
Attention: Before start power, please make sure voltage if meet the instrument requirement, please do not use
microscope if the voltage is different, it may cause damage or fire.
2.Sample setting
Open slider holder, put on slider with upper to upside. Take notice do not damage slider. The slider should be
even put on the stage, rotate stage moving wheel with X and Y to make slider into light path (as figure 04).
Figure 04
3.Stage sets
Figure 05
Slider
holder
Slider
Y moving
X moving
Stage
Abbey condenser
lift wheel
Lock screw
Aperture
Y direction
