MSH equipment WIZARD UP 30, Operating Instructions Manual

Page: 17 / 42

Wizard Up30 Rev. 4 28/04/2017
16
HYDRAULIC CONNECTIONS
Pic. 9a
Fig. 9b
POS. CODICE DESCRIZIONE
A 30UPW-4201
30UPW-4207 HoseR16T1/4L=4200 +
HoseR16T1/4L=270
D 30UPW-4204
30UPW-4208 HoseR16T1/4L=2800 +
HoseR16T1/4L=270
E 30UPW-4205 Hose (E)R16T1/4L=370
F 30UPW-4206 Hose (F)R16T1/4L=1600
G 04-2000 ” T” air connection
The hydraulic block is composed in that way (fig 9b):
A1 – Cylinder Input;
B1 – Cylinder Input;
OMA1 – Electrovalve EV1;
OMB1 – Electrovalve EV2;
ROS – Oil bleeding recycle
Power unit installation on the right:
You must be interlink hydraulic hose
A (fig.9a) in the Input
A1 of the hydraulic block (fig.9b); hose D in the input B1 of
the hydraulic block.
The hydraulic connections goes in the same way
for the installation of the power unit mounted on
the left, respecting the connection described on
the picture above fig.9a .
OMA1 OMB1
ROS
A1
B1