19
•
Switch off the unit immediately in case of blocking or twist. Disconnect the air supply and
do not switch on again until the problem is solved. Understand the reason why the tool
has been blocked and make sure that this situation will not occur once more by
counteract.
•
Make sure that the accessory you intend to use has no damage. Exchange the part if
you are not sure.
•
In case the air tool gives a strong vibration, replace the accessory
/
abrading medium,
probably it’s damaged or worn out..
•
Remember that a cracked sanding belt will cause serious hurts.
Explanation of the pictograms
:
Always use hearing protection, face and eye-protection, dusk-mask, if necessary a hair-net,
protective gloves and read / understand the instruction manual.
Technical Data
Free speed
16.000 rpm
Adequate abrading medium
520x20mm
Air inlet
1/4"
Air pressure
90 psi / 6,3bar
Air consumption
131 l/min
Weight 1.2
Kg.
A weighted emission sound pressure level (LpA) 95 dB (EN ISO 15744:2008)
A weighted sound power level (LwA)
106 dB (EN ISO 15744:2008)
Peak C-weighted instantaneous sound pressure
level at workstation (LpC)
110 dB (EN ISO 15744:2008)
Measurement uncertainty in the sound levels
3 dB
Vibration level
2.8m/sec² (EN 8662-1 & EN ISO 5349-1:2001)
Serial number
