English
Test bench MS112
8
5. APPROPRIATE USE
1. Use the bench for the specified purpose only (see sect. 1).
2. Use the «EMERGENCY STOP» emergency stop button only if necessary to stop the diagnostic
process urgently.
3. In case of failures in the operation of the bench, stop further operation and contact the
manufacturer or sales representative.
The manufacturer is not responsible for any damage or injury to human health resulting from
non-compliance with the requirements of this user manual.
5.1. Safety Guidelines
1. The bench has to be operated by the qualified persons who got the access to operate the
definite bench types and who were instructed on the safe operating procedures and methods.
2. The bench has to be turned off if the supply is terminated, during the cleaning and tidying up,
as well as in the emergency situations.
3. The work area must always be clean, with good light illumination, and spacious.
4. Do not touch the compressor or metal parts of the bench, after the start of the test or while
the red signal lamp «Danger» glows
5. To ensure electrical and fire safety PROHIBITED:
- connect the bench to the electrical network having faulty protection against current overloads
or not having such protection;
— use a socket without a grounding contact to connect the bench;
— use adapters, multi-place (having two or more connection points) sockets and extension
cords to connect the bench to the electrical network;
— operation of the bench in defective condition.
— Independently to repair and make changes to the design of the bench, because it can lead to
serious damage to the bench and deprive the right to warranty repair.
6. While mounting and dismounting of a unit from the bench, to prevent arms from harming, be
more cautious.
5.2. Test bench preparation for work
The bench is delivered packed. Release the bench from the packaging materials, remove the
protective film from the display (if available). After unpacking, it is necessary to make sure that
the bench is intact and does not have any damage. If damage is detected before the bench is
activated, contact the manufacturer or the sales representative.
The bench has a desktop version. When installing the bench, it is necessary that it is supported
by legs that can be adjusted in height by twisting or screwing them. The bench must be stable.
