MSG Equipment MS004 COM, User Manual

Page: 16 / 100

English
User manual
16
- 230V electrical mains, grounded.
WARNING! The bench should be used without a circuit breaker. If it’s not possible, the circuit
breaker cutoff current should be higher than 100mA.
- to test the units with the rated operative voltage 24V, the external 12V battery should be
connected to the bench. The battery is connected with the power cables (fig. 10, included to supply
slip) to the connectors on the right side of the bench (fig. 11). Follow the power cable markings
when connecting the battery.
WARNING! The battery located in the bench battery section is enough to test 24V voltage
regulators.
Figure 10. Power cables to connect the external battery
Figure 11. Ports for the connection of the external battery