MSG Equipment MS004 COM, User Manual

Page: 10 / 100

English
User manual
10
Figure 3 – Bench control panel
3 – Diagnostic outputs - for the connection to voltage regulator terminals:
В+ – for connection to terminals: 30, B+, IG, S, AS, BVS, A, 15;
FLD » – outputs - for the connection of the brushes of the voltage regulator at diagnostic mode
of voltage regulator or relevant terminals: DF, F, FLD;
В - – negative (earth, terminal 31);
D+ – input of control lamp of voltage regulator. It’s designed for the connection of the
following voltage regulator terminals: D+, L, IL, 61;
ST – output for the connection to the stator outputs (terminals) of voltage regulator: P, S, STA,
Stator;
GC – output connected to the control terminal of the voltage regulator: COM, SIG, etc.;
FR – alternator load control, connected to: FR, DFM, M;
50 – output connected to the starter terminal 50.
4 – Regulators:
REGULATION GC – setting of the alternator output voltage. It’s used when connecting the
alternator to the terminal GC.
ELECTRICAL LOAD – setting of the alternator electric load range (imitates car loads). Press to
smoothly switch off the load down to zero level.
ROTATION SPEED – control of speed and rotation direction of drive. Press to stop the drive.
5 – Indicator of control lamp operation.