Commissioning
User Manual | NanoServer® N2-Q170
32
6.4
Connecting the power supply
You can select between two different types of power supply:
8-30 Volt DC input (wide-range), automotive
90 Watt external power supply 100 - 240 Volt AC
6.4.1
Connecting the 8-30 V DC power supply
NOTICE
Damage to the product caused by improper voltage!
The product may be destroyed or damaged when supplied with voltages higher than
30 V DC.
Connect the product only to a power source that satisfies the requirements of safe
extra low voltage (SELV).
i
We recommend using the DC power plug included in the scope of delivery (
, on page
The voltage must be in the allowed range of
30 V DC.
Before connecting the power supply, ensure that the following prerequisites are ful-
filled:
The product is connected to the protective grounding,
on page
The signal cables are connected,
on page
The monitor is connected and switched on,
on page
Selectable power
supplies
Use proper voltage!
Prerequisite
