48
49
Periodic examination
Determine intial or new slippage point
8
This examination can only be performed if 7 is successful.
Place the maximum permissible dead weight (600 lbs / 281 kg) directly under the Tripod.
Connect the tension indicator to the eyelet on the load. Lower the snap hook keeping a hand tight
tension on the cable till the hook reached the connector of the tension indicator. Attach the snap
hook of the winch to the tension indicator, ensure it is secure.
Switch on the tension indicator. Raise the weight using the Winch 1 m from the surface. Hold the
weight at the height of 1 m for 3 minutes. Lower the weight again to the surface.
Record your findings on the examination check sheet.
If at any time during the test slippage occurs the test has failed, and the Winch will require to be
tagged unserviceable withdrawn from service.
Issue identified
Proceed to examination 9
<1 m
3.00
3.00
• When a test load is needed to
allow inspection of any winch
function, do not use personnel
as a load.
• Make sure the area below the
winch is free and clear of any
obstructions.
• Keep all body parts clear of the
suspended load and the area
underneath the suspended load.
Failure to follow this warning can
result in serious personal injury
or death.
WARNING
