ULTRA ELITE RESPONDER FACEPIECE
Installing the ClearCommand Microphone
ClearCommand Microphone
P/N 10024076
Retaining Ring
P/N 10023505
1. Thread the cable
through the component
housing.
2. Lightly lubricate the ring of the microphone
(P/N10024076) on its receiver side.
3. With the gasket
forward place the
microphone
(P/N 10024076) into
the component
housing.
4. Install the retaining ring
(P/N 10023505) and
firmly hand tighten.
5. Install the nosecup.
a. Stretch the nose cup
over the exhalation
valve flange.
b. Stretch the nose cup
over the retaining
ring.
6. Route the microphone
cable over the
component housing
retaining ring
centerline.
7. Assemble the component housing cover.
(See
Assembling the Component Housing Cover
for
instructions.)
8. Use a small Phillips
screwdriver to connect
the ClearCommand
microphone to the
mounting bracket.
9. Use a Phillips
screwdriver to tighten
the component housing
ring screw.
19
TAL 012 (L) Rev. 1 - 10096395