background image

ULTRA ELITE RESPONDER FACEPIECE

Installing the Internal and External Drinking Tube

External Drinking Tube

P/N 10093935

Internal Drinking Tube

P/N 10093937

Drinking Tube Connector

P/N 10082503

1. Lubricate the long end

of the drinking tube
connector with Snoop
(P/N 600920) and push
it into the internal
drinking tube ½”.

2. Lubricate the barb with Snoop (P/N 600920) and push

the drinking tube onto the drinking tube connector ½”.

3. Pass the internal drinking tube through the component

housing.

a. Angle the drinking

tube connector and
drinking tube 25°
below horizontal.

4. Pull firmly on the

internal drinking tube
until it seats.

Installing the Speaking Diaphragm

Speaking Diaphragm

P/N 804809

Retaining Ring

P/N 804808

1. With the gasket

forward (perforations
facing the wearer)
place the diaphragm in
the component
housing.

2. Install the retaining ring

(P/N 804808) and firmly
hand tighten.

Assembling the Component Housing Cover

Installing the Pneumatic Assembly

Pneumatic Assembly

P/N 10093940

Retaining Ring

P/N 10082058

Pneumatic Piston

P/N 10093941

O-Ring

P/N 10093994

Pneumatic Nut

P/N 10093939

Pneumatic Spring

P/N 10093942

Pneumatic Retainer

P/N 10093943

Nut

P/N 10082500

Exhalation Valve Spring

P/N 490133

1. Install the pneumatic

assembly.

Note:

The pneumatic assembly nests easily in the

component housing. Take care not to bend or flex the
tube when installing the pneumatic assembly.

10

TAL 012 (L) Rev. 1 - 10096395

25°

Summary of Contents for Ultra Elite Responder





















Reviews: