ManualNightFighterInstallation.doc
Prnt Spec. 10000005389(B) Mat. 10035581
07/23/02
Page 7 of 15
INSTALLATION FOR MMR TRANSMITTER
INTRODUCTION
This kit supplies the parts necessary to add the NightFighter Transmitter to the following SCBA:
•
MMR without a Quick-Fill Option
•
MMR with an old-style (pipe thread) Quick-Fill Option installed
•
MMR with a Redundant Alarm installed
•
MMR with an ICM 2000/2000 Plus installed
You must be a Certified Repairperson to perform the installation procedures which follow.
COMMON PARTS
•
638166
O-ring
•
635277
Backup ring (3)
•
10003605
Spool
REQUIRED TOOLS
The tools contained in the Tool Kit supplied to Certified Repairpersons will be sufficient to
install this kit.
WARNING!
Before starting the procedures below, be sure that the cylinder valve is completely closed.
Be sure that nothing blocks the regulator outlet. Open the bypass valve to relieve any
pressure in the system. Failure to follow this precaution can cause serious personal injury
or death.
