ManualNightFighterInstallation.doc
Prnt Spec. 10000005389(B) Mat. 10035581
07/23/02
Page 2 of 15
DESCRIPTION / INSTALLATION
TABLE OF CONTENTS
DESCRIPTION
....................................................................................................................2
PREPARING FOR USE
......................................................................................................2
DESCRIPTION
1. The NightFighter Bracket and Transmitter Kit is designed to attach to an MSA Ultra Elite
facepiece to allow the easy attachment and removal of the NightFighter.
ULTRA-ELITE FACEPIECE
Removing the Component Housing Cover for MMR
1. Remove the two component housing cover screws and spacers. Remove the neckstrap.
2. Remove the locking ring.
3. Lift up on the cover release hook, located forward of the adapter assembly opening. Once the
release is lifted, you can remove the cover by pulling it away from the housing. You must tilt
the cover and work it over one adapter bayonet at a time.
Removing the Component Housing Cover for MMR with Slide Connection
1. Remove the two component housing cover screws. Remove the neckstrap.
2. Lift up on the cover. You can remove the cover by pulling it away from the housing. You
can tilt the cover and work it over adapter.
3. Unthread and remove the adapter assembly.
Removing the Component Housing cover for BMR
1. Unthread and remove the adapter assembly.
2. Remo ve the two component housing cover screws and the neckstrap.
3. Lift up on the cover release hook, located forward of the adapter assembly opening. Once
the release is lifted, you can remove the cover by pulling it away from the housing.
