Version 3.4
8
NC-217
Operating manual
Figure 4 – Connection of NMEA 0183 signal receivers to “OUT7” to
“
OUT12” ports
Transmit and receive ports of the Product allow for connection of NMEA 0183
transmitter-receivers with input interface RS-422/485 and RS-232, see figure 5.
Figure 5 – Connection of NMEA 0183 transmitter-receivers to “DATA_I/O1” and
“DATA_I/O2” ports
NC-217 may be connected to PC through USB interface by a standard USB cable
type A (plug)
USB type A (plug). The Product’s board is equipped with a USB connector
type A to connect a cable.
Once NC-217 is connected to PC’s USB-port, the operation system will automati-
cally detect a new device by means of Plug-n-Play. To ensure proper interface operation,
install drivers delivered on a CD disk together with the Product. Once it is done, a virtual
COM-port will appear in the list of OS devices (Virtual COM port).
