MSA MultiGard 5000, Manual

Page: 31 / 132

23
3103-1001 Rev. 0
Sample text related to the dual MultiGard units.
This information can be ignored by users of single MultiGard units.
Users of MultiGard 5000 Dual 8 and MultiGard 5000 Dual 16 units should note the following rules
on using the same operator manual:

The same information content is provided on each screen across all models. The location of
some items may be different between the single and dual models.

Wherever dual MultiGard 5000 data is presented based on the number of sample points the
quantity will vary between 8 or 16 and be presented in a similar manner.

The phrases underlined and in quotes which lead to a description of an item still refer to the
original figures. In addition these items in the dual MultiGard 5000 system are specifically
labeled System A (SYS A) and System B (SYS B) to distinguish between the two separate
systems. Items common to the overall assembly do not use this designation.

When explicit labeling is not used the header text System A: and System B: are used.
Everything directly under these headers then applies to the system as labeled.

The relative position of System A grouped data is on the left. The relative position of System
B grouped data is on the right. Data common to the overall assembly is located in the center
or where space permits.

Any special notes and exceptions to these rules will be discussed in the appropriate section and
will be visually distinguished by the text box style as shown below.