Version 10.6.3
24
Marine automatic telephone system
ITS-1004
7.5.1
Direct communication
To activate this mode, pick up a receiver of UT.
After timer expiration and if another number was not dialed, the System starts
dialing pre-defined number. In this case «Direct communication» function is
automatically cancelled, and connection between two UTs is set in regular mode.
Note
Function is available for analog UTs with advanced features
7.5.2
Outgoing communication by authorization code for external connections
Authorization code ensures access to external lines.
Authorization code and users are specified at order and installed at Manufacturer’s
plant while programming the System.
The length of authorization code is 3 - 11 digits. Max. quantity of System codes – 200.
To connect to external line using authorization code:
1.
Select external line.
2.
Enter authorization code.
3.
Press [#].
7.5.3
Priority user
«Priority user» status may be assigned to any system user or several users at the
same time with the same rights. «Forced disconnection» function is available for Priority
users.
7.5.4
Forced connection
To activate this mode:
After call and busy «signal» press [#].
To ensure forced connection, a user shall have «Priority user» status. This status
and code of forced disconnection are agreed at order and assigned to user at
Manufacturer’s plant while system programming.
Note
Function is available for all UTs with «Priority user» status.
