MSA
Safety Regulations
ALTAIR 4X
6
GB
1
Safety Regulations
1.1
Correct Use
The ALTAIR 4X Multigas Detector is intended for use by trained and qualified per-
sonnel. It is designed to be used when performing a hazard assessment to:
- assess potential worker exposure to combustible and toxic gases and vapours
as well as low level of oxygen.
- determine the appropriate gas and vapour monitoring needed for a workplace.
The ALTAIR 4X Multigas Detector can be equipped to detect:
- Combustible gases and certain combustible vapours
- Oxygen-deficient or oxygen-rich atmospheres
- Oxygen for monitoring inertisation applications. The device is suitable and cer-
tified for the measurement of the oxygen concentration in gas mixtures for iner-
tisation according to EN 50104 but without alarm function.
- Specific toxic gases for which a sensor is installed.
It is imperative that this operating manual be read and observed when using the
product. In particular, the safety instructions, as well as the information for the use
and operation of the product, must be carefully read and observed. Furthermore,
the national regulations applicable in the user's country must be taken into account
for a safe use.
The ATEX directive is only valid until 25% Vol O
2
.
Alternative use, or use outside this specification will be considered as non-compli-
ance. This also applies especially to unauthorised alterations to the product and to
commissioning work that has not been carried out by MSA or authorised persons.
Danger!
This product is supporting life and health. Inappropriate use, mainte-
nance or servicing may affect the function of the device and thereby se-
riously compromise the user's life.
Before use the product operability must be verified. The product must
not be used if the function test is unsuccessful, it is damaged, a compe-
tent servicing/maintenance has not been made, genuine MSA spare
parts have not been used.
FASIT Srl
- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 -
www.fasit.it
-
