MRF 13216, Operator'S Manual

Page: 2 / 32

2
Introduction
Using This Manual
The term loader is used in this manual to refer to a skid steer loader.
Your loader operator’s manual contains instructions to safely operate the
loader. Anyone who operates a loader with this attachment installed must
first read, understand and follow the instructions in the loader operator’s
manual.
This manual contains instructions to safely operate and service the
attachment. Anyone who operates or services the attachment must first
read, understand and follow the instructions in this manual.
Additional operating or servicing information for the attachment may be
provided online, in video, or in other publications. This additional infor-
mation does not replace, and is not a substitute for reading and following,
the instructions in this manual.
The safety alert symbol is shown in WARNING statements to alert users
to hazards which could cause death or injury. Carefully read and follow
the messages.
IMPORTANT notices alert users to instructions which, if not followed,
could result in damage. Carefully read and follow the messages.
There may be times when the attachment and loader shown in this man-
ual may not be your exact model. The model shown will be close enough
to your attachment or loader to accurately convey the information.
The most current information available is included in this manual. The
publisher may revise this manual at any time and is not required to notify
users of revisions.
Replacement Manuals
Be sure to include this operator’s manual if you sell or transfer owner-
ship of the attachment.
Contact Messer Repair and Fabricating, LLC for a printed manual, or
find a downloadable manual on our website.
Using This Attachment
The attachment is designed to spread materials placed in the hopper.
The attachment is designed for installation on a full-size loader, connect-
ed to the loader’s front auxiliary hydraulic couplers. The loader must
have a minimum hydraulic system flow capacity of 10 GPM at 2,000 psi