5-9.Meter CH.: The default setting is M1=04
、
M2=04
、
M3=04
5-9-1.Press KEY once, then select METER1 the open when the CH.
Choice. At this point CH. Flashes when you press
▲
KEY will
In polling mode to select 1,2,4,8,12 of CH. Number, press
SETUP KEY value determined after storage and M1 Flashes. Press
KEY once you enter METER2 (Press
▲
KEY to select
CH. & Press SETUP KEY value Storage), press KEY once
you enter METER3 (Press
▲
KEY to select CH. & Press SETUP
KEY values Storage) Press the fourth time when the back
METER CH. directory option
5-9-2.Press
▼
KEY into the Default Settings option from Meter CH.
5-10.Default Settings: Reply factory setting (refer NO.4-7)
4-5.Set value storage:
Press EXIT / SHIFT KEY save settings, and return to the measurement
screen, such as SCREEN4-2-3 or SCREEN4-2-4. This time to reconnect
after about 25 SEC WiFi is doing set after, then back SCREEN4 -2-1 or
SCREEN4-2-2 screen.
4-6. WiFi connection:
In SCREEN4-2-1 or SCREEN4-2-2 screen, symbol flashes when the upper
right corner, said the WiFi connection has been properly
4-7.Reply factory setting
1.Press SETUP KEY once you enter the setup screen as SCREEN4-2-5 &
SCREEN4-2-6
2.Press
▲、▼
KEY select the option to Default Settings item, press KEY
once you enter N option, press
▲
or
▼
KEY select Y press Enter KEY
,will return to directory option then press EXIT / SHIFT KEY will return to
factory default action to do its screen will SCREEN4-2-3 or SCREEN4-2-4,
after about 25 SEC later. would return SCREEN4-2-1 or SCREEN4-2-2.
7
