For example :
If the total input signal ( pulse ) per minute
is 501, the setting pulse no. per round is 1,
the roller diameter is 10 cm
the ft/min. value will be 501/1x10x3.14/30.48=516.1
* The procedures that to set the
" Pulse no. per round "
" roller diameter ( cm ) "
refer to the page 10, 11, " 4-5 2nd layer setting
procedures ".
4-4 1st layer setting procedures
CtSP
Control value setting
LoLt
Low limit value setting
HILt
High limit value setting
Control Value Setting
1)Press the " Set Button " ( 3-4, Fig. 1 ) once, the
" Display " will show " CtSP ", now the meter is ready
for the " Control value " setting.
2)Use the " Button " ( 3-5, Fig. 1 ) and the "
▼
▲
Button " ( 3-6, Fig. 1 ) to adjust the desiring " Control
value ".
Remark :
* When adjust the value, the " SV indicator " ( 3-3, Fig. 1 )
will light.
* The function of " Control value " setting, refer to
page 12, Fig. 3.
8
