MRC IR-CAM-400 Operation Manual Download

Page: 35 / 87

temperature reading. During calibration, if temperature reading is higher
than actual target temperature, change ratio value lower, and vise versa.
Press

once to change ratio value by 0.01. Long press

will change ratio value by 0.1 intervals.

Adjust Temp

Under certain condition, it is necessary to adjust temperature reading by a
pre-define value. Normally this option should be left unchanged. Press

once to change by 0.1

C. Long press

will change this

value by 1

C interval.

Save Setting

All parameter changes must be saved before power off device. Otherwise,
changes will not be saved for next power on.

5.2.3 Image

There are 5 items: Image Setup, Analysis Setup, Image Reverse, Clear
Screen, and L&S (Auto/Manual) in Image Menu.

Image sub-menu

Summary of Contents for IR-CAM-400
























































































Search results

Summary of Contents for IR-CAM-400

Reviews:

Related manuals for IR-CAM-400

Brands by name

Popular brands

MRC IR-CAM-400, Operation Manual

Search results

Summary of Contents for IR-CAM-400

Reviews:

Related manuals for IR-CAM-400

Brands by name

Popular brands